Please do not touch the head section after the machine was just being used, so as to not be burnt by high temperature. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely.
When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be better controlled. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.Air flow rate:Simple Version: 40L/MIN, Other: 50L/MIN. Working Pressure: 300BAR 30MPA 4500PSI.
Charge pressure: 30MPA (it will automatic shut down as the pressure over 30MPA). Dimensions:36CM 18CM 37CM (7.4"3.6"2.7). Type: 4 Versions for choosen. 1 x Electric Air Pump.
1 x Set of Accessories. Since all the CNC Machine must be carefully tested before sending out. These charges are buyers responsibility.
The item "220V 30MPa 4500PSI PCP Electric Air Compressor Air Pump System High Pressure HOT" is in sale since Thursday, June 7, 2018. This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps". The seller is "ele_energy" and is located in Shenzhen.
This item can be shipped worldwide.